3060 – 3/4″ Garden Hose Connection Brass Female Swivel GHT x Male GHT
Garden Hose Connectors are available for 3/4″ Garden Hose Thread (GHT) Spigots with Female Swivel GHT x Male GHT connections for simple attachment to a standard hose bib. They are manufactured from a range of materials including Schedule 40 PVC and Brass. They are used to connect the EZ-FLO system to the garden hose for drip or hand watering, before or after the valve with the 1/4″ flexible tubing provided with every EZ-FLO system. Ball Valve version (3060-BV) provides the ability to adjust the differential pressure between the inlet and outlet connections to allow for injection at very low flow rates. The standard connections (3060 & 3060-CG) utilize the Flo-Disc kit included with the 1000 and 2000 series injection systems.
Standard with the EZ 2005-HB & EZ 2020-HB
Virtually any type of liquid or water-soluble fertilizer or liquid product can be used in an EZ-FLO unit
In normal operating conditions, the EZ-FLO requires no maintenance.There are zero moving parts to wear out and no electrical components. EZ-FLO units work using existing water pressure from your system.
Consistent and Accurate Metering – other systems can deliver dangerously high levels of fertilizer or chemicals in the first few minutes, and then drop below the ideal feeding range for the remainder of the application cycle. With EZ-FLO, your landscape receives consistent micro-doses of fertilizer or nutrients which is proven to be the best way to feed your plants.
Adjustable Feed Rates – Various precision settings enable you to achieve desired feed rates for just about any fertilizing or control situation. Micro-dosing also eliminates the chance of “burning” your plants or staining buildings or walkways. Most other systems are difficult to adjust or are non-adjustable.
Automatically Adjusts to Pressure and Flow – Since there are no moving parts, there is no pressure loss when using our system. EZ-FLO systems can proportion on a little as 0.53 gallons per hour flow at only 5 PSI (35 kPa) water pressure. This makes EZ-FLO particularly useful on irrigation systems with low water pressure, on long piping runs or when installed on a low-flow drip or other subsurface irrigation zones. It, however, is also rated to 80 psi + hence suitable for high-pressure systems as well. Most other systems do not adjust automatically or have a wide flow range as EZ-FLO.
Availability of Products – EZ-FLO can use a full line of organic, natural and synthetic fertilizers as well as supplements (bio-stimulants, mineral supplements and surfactants) in landscape and grower applications through our recommended supplier links . These products are available a la carte.
Ease of Use – No pre-dilution of water solubles required. No annual maintenance. Longer service life. Fewer refills for the equivalent size property. Greater landscape coverage available ( 1.32 to 86 gallons units)
EZ-FLO systems can be used with all sprinkler and spray heads, micro-spray heads and drip and subsurface options without the need to adjust the system for zones with different end devices (i.e. spray heads vs. drippers).
EZ-FLO adjusts automatically to water flow in any zone even if there are different pressures present in that zone. For example many drip zones have pressure reducers in order to protect the dripper heads.
Competing systems do not have the same ability to easily address these different flow and pressure attributes with a single unit.